As an Amazon Associate I earn from qualifying purchases. Links on this page may earn 3DPicks a small commission at no extra cost to you.
Resin printer owners are easy to shop for once you know what they run out of! Between gloves, alcohol, spare film, and resin, there’s always something on the list, and most of it is stuff they wouldn’t buy for themselves until the day it’s needed.
This guide covers six gifts that fit that pattern, from a wash and cure station to a can of primer. If the person you’re shopping for is still undecided between resin and filament, my resin vs filament comparison explains the trade-offs.
How we chose
I looked for gifts that a resin owner will actually use up or rely on, not novelty items. A few things guided the picks:
- Resin is messy and the fumes aren’t great to breathe, so safety gear gets real weight.
- Consumables like FEP film and gloves are better gifts than gadgets, because they never go unused.
- Anything model-specific, like FEP film, needs the printer’s exact model checked before buying.
- Check today’s price on each one, since they change often.
Stocking stuffers and everyday consumables
Kimberly-Clark Purple Nitrile Exam Gloves
Gloves are the least exciting gift on this list and probably the one that gets used the most. Nitrile is the usual choice for handling resin and isopropyl alcohol, and a big box lasts a good number of print sessions.
I think it’s worth reminding the recipient that thin gloves should be changed whenever they get contaminated, rather than reused all afternoon. Pair them with something else from this list and it makes a nice small gift.
Kimberly-Clark Purple Nitrile Exam Gloves — Best for: A practical stocking stuffer for anyone who goes through gloves every print
Pros
- Nitrile is the usual choice for handling resin and isopropyl alcohol
- A big box covers many print sessions
- Easy to see on the hands, which helps spot stray resin
Cons
- Thin gloves should be swapped out often
- Not a replacement for good ventilation
ELEGOO FEP Film 5 Pack
Every resin printer eventually needs new FEP film, usually right after a failed print leaves a cloudy or punctured spot in the vat. A multi-pack means the owner has spares waiting instead of a stalled weekend project.
The catch is that sizes vary by printer, so look up the exact model and match the listing before ordering. It’s a better gift for someone with a printer you know well than for someone whose setup is a mystery.
ELEGOO FEP Film 5 Pack — Best for: Someone with an Elegoo or similar LCD resin printer who has had a few failed prints
Pros
- Replacement film is an easy thing to run short on
- A multi-pack means the owner has spares for later
- A sensible gift that gets used for sure
Cons
- Sizes differ by printer model, so match it to the exact printer
- Swapping film takes a bit of patience the first time
Tamiya Fine Surface Primer L Grey
Primer is the first step to getting resin miniatures and models to look finished. A fine grey spray shows the spots that still need sanding, and it gives paint something to grip.
It’s best suited to someone who already paints, or who has been saying they’d like to start. Spraying should happen outdoors or in a well-ventilated space, and my guide to painting 3D prints has more on finishing supplies.
Tamiya Fine Surface Primer L Grey — Best for: A resin owner who prints miniatures or models and likes to paint them
Pros
- Fine coverage that suits small detailed prints
- Shows surface flaws that still need sanding
- Good starting point for painting minis and props
Cons
- Needs outdoor or well-ventilated spraying
- One can goes faster on larger models
Solid mid-range gifts
3M Half Facepiece Reusable Respirator 6200
Resin fumes are the part of the hobby that many newcomers underestimate. A reusable half mask with organic vapor cartridges is a more sensible option than a paper dust mask, and it’s the kind of gift that shows you took the hobby seriously.
Fit matters a lot, so confirm the recipient’s size, and check that the cartridges are included because some listings sell them separately. It doesn’t replace ventilation, though it’s a great addition for anyone printing in a small room.
3M Half Facepiece Reusable Respirator 6200 — Best for: Owners who print in a garage, spare room, or small workshop and want better fume protection
Pros
- Reusable and works with replaceable organic vapor cartridges
- A properly fitted half mask is more suitable for resin fumes than a basic dust mask
- Comes in several sizes
Cons
- Cartridges may be sold separately, so check the listing
- Fit matters, so size needs to be right
Siraya Tech Blu Tough Resin
Many resin owners start with standard resin and stay there. A tougher resin opens the door to brackets, clips, and parts that need to take a bit of stress, so it’s a good gift for someone who wants to make useful things as well as figures.
It’s less ideal for the finest miniature detail, so it fits a maker who prints a mix of items. Owners often have their own exposure settings, so a quick message to ask which printer they use is worthwhile.
Siraya Tech Blu Tough Resin — Best for: A resin printer owner who wants to make useful parts instead of only figures
Pros
- A tougher resin that suits functional parts and brackets
- Well known among hobbyists
- A good change of pace from standard resin
Cons
- Not the best option for the finest miniature detail
- Owners may have settings preferences for their printer
The bigger gift
ELEGOO Mercury Plus V3.0 Wash and Cure Station
If the recipient is still washing prints in a plastic tub and curing them on a windowsill, a wash and cure station is the upgrade that changes the workflow the most. It keeps the mess contained and cuts down on handling wet parts with your hands.
It takes up real bench space, so I’d check the size of the build plate and the largest parts they print before buying. It’s better suited to someone printing regularly than someone who runs a resin printer once a month, though for the former it’s well worth the money.
ELEGOO Mercury Plus V3.0 Wash and Cure Station — Best for: Someone who still washes and cures prints by hand in a tub and a sunny window
Pros
- Washes and cures in one unit, so there is less to set up on the bench
- Takes a lot of the mess out of handling freshly printed parts
- Suits a range of common resin printer sizes
Cons
- Needs plenty of bench space
- Check that the wash basket fits the owner’s build plate and part sizes
Holiday buying tips
- Decide on a budget first, then pick the category that matters most, whether that’s safety, consumables, or workflow.
- Compare models and what’s included rather than chasing discount labels.
- Check what’s in the box and what else is needed. Cartridges, alcohol, and the right film size are common gaps.
- Buy early so delivery doesn’t become a worry, especially around Black Friday (Nov 27), Cyber Monday (Nov 30), and Christmas (Dec 25).
- Keep gift receipts in case a size or model turns out to be wrong.
If your giftee also runs a filament machine, my list of 3D printing gifts for hobbyists has more ideas.
FAQ
What’s the safest gift for someone new to resin printing?
Nitrile gloves and a fitted respirator are the most useful starting point, because resin is irritating to skin and the fumes aren’t something you want to breathe. Always check the resin maker’s safety data sheet and make sure the room has good ventilation.
Does FEP film fit every resin printer?
No. Sizes and mounting differ by model, so match the film to the exact printer before buying. If you aren’t sure, ask the owner or look at the printer’s model name in the slicer.
Is a wash and cure station worth it?
For someone who prints often, I think so. It makes the cleanup step tidier and more consistent, and it cuts down on handling wet prints. For an occasional printer, a simple tub and a UV lamp may be enough.
As an Amazon Associate I earn from qualifying purchases. Links on this page may earn 3DPicks a small commission at no extra cost to you.



